CPCCCM3001 - Operate elevated work platforms up to 11 metres

Unit code: CPCCCM3001 | Study level: TAFE
Nominal hours:
32
Location
Sunshine
Prerequisites
N/A
Overview
Enquire

Overview

This unit of competency specifies the outcomes required to operate specific types of elevated work platforms (EWPs) safely and effectively in different locations, including on uneven terrain. The unit includes locating, setting up, operating and shutting down scissor lifts and self-propelled boom lifts with a boom length under 11 metres.



The unit supports construction workers in the safe and effective operation of electrical, hydraulic and mechanical EWPs.

The unit does not cover truck-mounted EWPs, powered telescoping devices, hinged devices or articulated devices, or any combination of these used to support a platform on which personnel, equipment and materials may be elevated to perform work and which has a boom length of 11 metres or more.



It applies to construction work on residential and commercial work sites in new construction, renovation or refurbishment, and maintenance projects.



Licensing, legislative, regulatory or certification requirements apply to this unit in some States. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.

Assessment

For Melbourne campuses

Assessment tasks will be designed to reinforce & extend knowledge and skill competence within set & controlled parameters in accordance with each units learning outcomes & performance criteria requirements, including the setting of work based practical application tasks designed to provide evidence of competence outcomes, within periodic and scheduled timelines.

Students will be expected to demonstrate the following required skills:
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. The person must also set up and operate each of the following types of elevated work platforms (EWPs) at two different locations on the site, including moving the plant around the work site safely:

  • self-propelled boom lift (BL)
  • scissor lift (SL).
    The following functions and controls must be performed while operating both BL and SL:
  • boom up and down
  • operate attachments
  • operate outriggers, where fitted.
  • The following functions and controls must be performed while operating the BL:
  • slew left and right
  • telescope in and out.
    At least one EWP must be set up and operated on uneven terrain, using outriggers as required.
    In doing the above, the person must fit harnesses and attach lanyards as follows:
  • energy or shock absorbers, which must be used with all fall arrest equipment
  • lanyards, which must be attached to the harness installed so that the maximum distance a person equipped with a harness would free fall before the fall arrest system takes effect is two metres.
    In doing the above, the person must also:
  • establish and apply a rescue plan
  • apply safe operating procedures, including conducting operational risk assessment and treatments associated with:
  • earth leakage boxes
  • lighting
  • power cables, including overhead service trays, cables and conduits
  • restricted access barriers
  • surrounding structures
  • traffic control
  • trip hazards
  • work site visitors and the public
  • working at heights up to 11 metres
  • working in proximity to others
  • working with dangerous materials
  • locate, interpret and apply information relating to job requirements, including:
  • diagrams and sketches
  • environmental requirements, including:

    clean-up protection
    noise and dust management
    vibration management
    waste management

  • quality requirements relevant to EWP work
  • instructions issued by authorised organisational and external personnel
  • manufacturer specifications, operator manual, and instructions where specified
  • signage
  • industry standards and job specifications
  • verbal, written and graphical instructions
  • work schedules, plans and specifications
  • comply with site safety plan and health and safety legislation, regulations and codes of practice applicable to workplace operations
  • safely and effectively use tools, plant and equipment relevant to EWP work
  • ensure safe working load of EWP is not exceeded
  • communicate with others on the work site using verbal and non-verbal communication and communication technology
  • work effectively and safely with others on the work site.

Students will also be expected to demonstrate the following knowledge:

  • functions and operational limitations of EWP equipment;
  • types of EWP equipment and health and safety authority certification of competency requirements;
  • controls and techniques for using EWP;
  • health and safety requirements for construction work sites;
  • processes for identifying equipment faults;
  • general construction terminology relevant to operating EWPs;
  • safe operating procedures for operating EWPs, including contents of and terms used in job safety analyses (JSA), safe work method statements (SWMS), and safety data sheets (SDS);
  • processes for calculating load mass requirements;
  • quality requirements relevant to operating EWPs;
  • regulatory and legislative requirements relevant to operating EWPs;
  • AS 2550 Set: Cranes, hoists and winches - Safe use;
  • relevant Acts, regulations and codes of practice relevant to working safely at heights on construction sites;
  • procedures for working safely at heights;
  • signalling methods and communications relevant to operating EWPs;
  • types, characteristics, use and limitations of plant, tools and equipment relevant to operating EWPs, and;
  • use and limitations of fall rescue systems.

Required reading

The qualified trainer and assessor will provide teaching and learning materials as required in the form of workbooks produced by Victoria University and/or via the Victoria University e-learning system.

As part of a course

This unit is studied as part of the following course(s):

Certificate III in Carpentry
CPC30220 | Certificate iii | Duration:
Certificate III in Plumbing
CPC32420 | Certificate iii | Duration:
Certificate III in Signs and Graphics
CPC30216 | Certificate iii | Duration:

Refer to the course page for information on how to apply for the course. VU takes care to ensure the accuracy of this unit information, but reserves the right to change or withdraw courses offered at any time. Please check that unit information is current with the Student Contact Centre.

Search for units, majors & minors